 |
Sherline Cross Slide Accessory Block Posted by: gmark1953
Video duration: 386 seconds Global video hits: 12794 A homemade accessory block for holding work on the lathe cross slide to allow drilling and machining Related: drilling, hsm, lathe, machining, milling, science, sherline, technology, tools |
 |
Sherline Table Saw Attachment Posted by: gmark1953
Video duration: 264 seconds Global video hits: 19701 A small homemade table saw for use with slitting saws on the Sherline lathe Related: lathe, machines, machining, milling, motors, saw, science, sherline, slitting, tablesaw, technology, tools |
 |
Sherline CNC Gear Cutting Part4 Posted by: Hobbynut
Video duration: 311 seconds Global video hits: 7186 Demonstration on Gear Cutting part4 Related: cnc, cutting, gear, sherline |
 |
Sherline CNC Gear Cutting Part5 Posted by: Hobbynut
Video duration: 469 seconds Global video hits: 18424 Demonstration on Gear Cutting part5 Related: cnc, cutting, gear, sherline |
 |
Sherline CNC Gear Cutting Part2 Posted by: Hobbynut
Video duration: 337 seconds Global video hits: 7102 Cutting gears on Sherline CNC equipment part 2 Related: cnc, cutting, gear, sherline |
 |
Graver and Tool Rest for the Sherline Lathe Posted by: gmark1953
Video duration: 219 seconds Global video hits: 14571 Demo of graver use on the Sherline lathe using shopmade graver and tool rest based on plans from W.R. Smith Related: clock, cutting, graver, homemade, lathe, machining, milling, sherline, shopmade, tool |
 |
Home made Gear cutting Hobs on my Sherline Posted by: Hobbynut
Video duration: 313 seconds Global video hits: 3702 Demonstration of making home made gear cutting hobs using my sherline equipment, part1 Related: cutting, gear, hob, making, sherline |
 |
Sherline CNC Gear Cutting Part6 Posted by: Hobbynut
Video duration: 545 seconds Global video hits: 4828 Demonstration on Gear Cutting part6 Related: cnc, cutting, gear, sherline |
 |
Sherline CNC Gear Cutting Part1 Posted by: Hobbynut
Video duration: 167 seconds Global video hits: 6852 Demonstration of Cutting a Gear using sherline CNC equipment. Related: cnc, gear, sherline |
 |
Leadscrew cover for your Sherline mill Posted by: ixenyeo
Video duration: 156 seconds Global video hits: 4407 In this video, I'll be showing you how to make a leadscrew cover for your Sherline mill. Related: cnc, cover, leadscrew, sherline |
 |
Sherline CNC Gear Cutting Part3 Posted by: Hobbynut
Video duration: 288 seconds Global video hits: 5096 Gear Cutting Demonstration part3 Related: cnc, cutting, gear, sherline |
 |
Sherline Mill Table Stops Posted by: gmark1953
Video duration: 57 seconds Global video hits: 8365 Table stops for milling on the Sherline Vertical Mill Related: cutting, homemade, lathe, machining, machinist, mill, milling, science, sherline, shop, stops, table, technology |
 |
Sherline CrossSlide Clamp Posted by: gmark1953
Video duration: 156 seconds Global video hits: 3568 Cross Slide Table Clamp for Machining Operations Related: clamp, cutting, drilling, lathe, machining, milling, science, shaping, sherline, slide, technology |
 |
Sherline mill Posted by: tgreening
Video duration: 26 seconds Global video hits: 8502 Sherline mill running 75ipm rapids. Totally useless speed on a sherline but the home made dampeners seem to have cured my resonance issues. Related: dampeners, mill, resonance, sherline |
 |
Sherline mill with resonance issues. Posted by: tgreening
Video duration: 36 seconds Global video hits: 6247 A sherline mill running a xylotex system and serious resonance issues. Speed was 22ipm. You can see the effect adding a dampener has. 100ipm feeds are possible, though not usable, using the dampener. Related: dampener, mill, resonance, sherline, xylotex |
 |
Showing gear cutting using the Mumford/Sherline CNC indexer Posted by: TTompion
Video duration: 489 seconds Global video hits: 574 Part of a WGBY "Making It Here" series from December, 2008. Ray Bates, MBHI, Pres. The British Clockmaker, Newfane, Vermont. Related: chronometers, clocks, escapements, gearcutting, horology |
 |
Sherline CNC Gear Cutting Part7 Posted by: Hobbynut
Video duration: 63 seconds Global video hits: 3581 Demonstration on Gear Cutting part7 Related: cnc, cutting, gear, sherline |
 |
First Sherline CNC Milled Pattern... Posted by: formwalt
Video duration: 47 seconds Global video hits: 3933 Bevel gear contour pattern used to verify operation of machinery and to get some practice using it. Related: bevel, cnc, gear, robotics, sherline, wood |
 |
CNC Turning on the Sherline Mill Posted by: microsteppingcnc
Video duration: 28 seconds Global video hits: 26140 When a CNC lathe is not available, use the mill! I need to keep the couplings aligned with the 1/4" hole. Machining them on the mill, attached to a motor, makes sure they don't wobble in use. Turning them on the lathe never worked out right. http://www.micros tepping.com/ Related: cnc, machine |
 |
Taig and Sherline working together with MACH3 part 4 of 5 Posted by: ironzzz4
Video duration: 43 seconds Global video hits: 1680 Reflector job Related: mach3, sherline, taig |
 |
Taig and Sherline working together with MACH3 part 2 of 5 Posted by: ironzzz4
Video duration: 53 seconds Global video hits: 917 Reflector job Related: mach3, sherline, taig |
 |
Flycutting Delrin on a Sherline 5400 CNC Mini Mill Posted by: gfixler
Video duration: 24 seconds Global video hits: 3200 To test out a 3/16" dovetail end mill I found online, I first needed a flat surface, so I planed a small scrap piece of Delrin with a fly cutter. You can see that my mill isn't "trued up" here. The cutter makes a second planing cut as the trailing end passes over the part. That shouldn't happen, but it was still a decently flat edge for my testing purposes. Related: celcon, delrin, flycutter, flycutting, mill, milling, minimill, planing, sherline |
